amirawaleed
15 - 05 - 10, 10:42 AM
سيتم بمشيئة الله عقد دورة تدريبية بعنوان
( CAESAR II – Pipe Stress Analysis )
لمهندسى البترول
سيتم عقد الدورة فى الفترة من 4 - 8 يوليو 2010
بفندق فلورا كريك بدبى :-
Caesar II: (pipe stress analysis)
Day 1- introduction to piping stress analysis
Piping stress theory – primary & secondary stresses, equivalent state of stress, Definitions, codes of practice: mandatory requirements &legal responsibilities.
Piping systems: in-line equipment, supports, boundary conditions.
Flexibility requirements, local flexibility of nozzles.
Practical applications – software / hardware requirements.
Introduction to CaesarII: STATIC ANALYSIS.
Day 2
Static analysis: example 1 - expansion loop .
Modeling techniques , use of Caesar II main features .
Static analysis :example 2- pump suction system .
Additional & advanced Caesar II features .
Day 3
Static analysis: example 3-distillation column pipe work .
WRC 297 analysis, Static wind simulation analysis .
Static analysis: example 4 – pump system trouble shooting .
Static analysis: example 5 – buried pipe modeling .
Day 4
Model analysis , natural frequency response .
Eigen value & eigenvector analysis .
Day 5
Dynamic analysis :Example 1 – harmonic (vibration ) analysis .
Dynamic analysis :Example 2 – water hammer analysis .
Dynamic analysis :Example 3 – relief valve analysis .
Dynamic analysis :Example 4 – earthquake analysis .
للتواصل والاستفسار
ادارة التدريب
00971506860422
amira@leadersuae.net (amira@leadersuae.net)
( CAESAR II – Pipe Stress Analysis )
لمهندسى البترول
سيتم عقد الدورة فى الفترة من 4 - 8 يوليو 2010
بفندق فلورا كريك بدبى :-
Caesar II: (pipe stress analysis)
Day 1- introduction to piping stress analysis
Piping stress theory – primary & secondary stresses, equivalent state of stress, Definitions, codes of practice: mandatory requirements &legal responsibilities.
Piping systems: in-line equipment, supports, boundary conditions.
Flexibility requirements, local flexibility of nozzles.
Practical applications – software / hardware requirements.
Introduction to CaesarII: STATIC ANALYSIS.
Day 2
Static analysis: example 1 - expansion loop .
Modeling techniques , use of Caesar II main features .
Static analysis :example 2- pump suction system .
Additional & advanced Caesar II features .
Day 3
Static analysis: example 3-distillation column pipe work .
WRC 297 analysis, Static wind simulation analysis .
Static analysis: example 4 – pump system trouble shooting .
Static analysis: example 5 – buried pipe modeling .
Day 4
Model analysis , natural frequency response .
Eigen value & eigenvector analysis .
Day 5
Dynamic analysis :Example 1 – harmonic (vibration ) analysis .
Dynamic analysis :Example 2 – water hammer analysis .
Dynamic analysis :Example 3 – relief valve analysis .
Dynamic analysis :Example 4 – earthquake analysis .
للتواصل والاستفسار
ادارة التدريب
00971506860422
amira@leadersuae.net (amira@leadersuae.net)